CHEMICAL / OIL SPILL KITS

 
Spill Control and Pollution Solutions from the Specialists
The ability to demonstrate due diligence in the event of a spill has become an important issue today. This involves taking all steps possible to prevent pollution and minimize environmental damage.
 
When spills occur, even though they might be a rare occasion, having the right:
 

ABSORBENTS

Spill Control and Pollution Solutions from the Specialists
 

• Loose Absorbent Particles
• Biodegradable & Bio-Active Absorbents
• Absorbent Booms, Pads & Pillow
• Chemical Neutralizer Absorbents
• Chemical Binders
• Bio Hazard Absorbents
• Marine Spill Absorbents & Booms

 
Spill Control and Pollution Solutions from the Specialists
Absorbent Solutions for spills of Hydrocarbons - Oils & Fuels, Hydraulic Fluids, Solvents, Paints etc. and most General Non-hazardous Fluids.
 

 

ALL HYDROCARBONS & GENERAL NON HAZARDOUS FLUIDS

• Fuels (diesel, petrol, jet fuel)
• Hydraulic Fluids, Lubricating Oils
• Solvents (kerosene, etc)
• Ethanol, Methanol, Butanol etc
• Coolants, Paints (water & oil based)
• Cooking Oils, Oil Based Inks
• Mild Acids & Caustics (below 50% conc.)
• Protein Fluids - Blood, Vomit, Body Fluids
• Pesticides & Herbicides
• Sewage
• Foodstuffs, Non-hazardous fluids

 
 
An advantage of our range of Hydrocarbon Absorbents is the ability to dispose of the used waste directly into landfill at no cost, as they pass the required USEPA Test Standards. (Certificates available on request)
 
Bio-Waste/Body Fluids Absorbents - 500ml Sachet
 
 
LSL BIO-WASTE Absorbent is a fast, simple and safe spill response for all these fluids and replaces traditional cleaning methods of mop & bucket and paper towels.
"Why add water and spread the spill ?"
LSL BIO-WASTE Infectious Waste Absorbent will rapidly immobilize potentially hazardous spills. Its unique absorbent properties allow the spill to be swept away without the risk of personal contact. It will reduce odours & the potential for cross contamination with the addition of deodouriser/antiseptic in the product .
With a blend of natural essential oils added for their de-odourising &  antiseptic properties it can be used for infectious spills such as:
  • Human - vomit, urine, blood, faeces
  • Animal - vomit, urine, blood, faeces
  • Spoiled food - waste bins, sullage
  • Contaminated waste - sewage, food waste liquids
 
For "best practice" procedures when dealing with a potential infectious biohazard bodily fluid, we recommend & include a Therapeutic Goods Association  (TGA) approved product...CAVICIDE  All-In One Hospital grade Disinfectant / Decontaminant Cleaner / Malodour Suppressor.
 
Absorbent Particles - SPILL STOP Econo
 
• Natural earth “Diatomite” - Inert, lightweight, highly porous, microcellular, partially organic material – highly absorbent fibres with a large surface area therefore: “Use less, clean-up less and dispose of less, in quicker time, than with kitty litter & other poor performing absorbents”
• lower cost Econo version
• rapidly absorbs a wide range of fluids & suitable for all oils, fuels, solvents, paints, acids, caustics & most chemicals
• non-flammable, non-toxic, non-hazardous
• tested to EPA landfill standards 9095A & 1311 which means environmental & landfill disposal advantages – (No cost disposal into general waste when used on hydrocarbons - see EPA Guideline Bulletins & test data)
• can be used indoors and out
• leaves no surface slick - quick, easy & safe to use
• Available in 5 litre jug/ 10 kg bag , etc as specified below.
• 10 kg weight bags also meets OH&S lifting standards
 
SPILL STOP Econo
 
Absorbent Particles - SPILL STOP PREMIUM
 
SPILL STOP PREMIUM
 
SPILL STOP PREMIUM
 
  • Dry Clean your floor and pick-up any type of spill. You don’t need to de-grease floor that regularly, use SPILL STOP PREMIUM.
  • can be used on any fluid except hydrofluoric acid and very strong oxidising agents. MSDS sheet available.
  • Is a Fire Resistant Absorbent - SPILL STOP PREMIUM is a universal granular absorbent used in the clean-up of chemical spills.
  • SPILL STOP PREMIUM absorbs instantly, compacts for disposal, and more importantly, does not support combustion and assists in preventing ignition.
  • Is available in ACID & CAUSTIC NEUTRALISER formulations and also a BIOHAZARD version
  • Environmental Health and Safety Benefits

    • Environmentally safe - non reactive chemicals 
    • No known carcinogens 
    • Does not support combustion - Non Toxic - Light Weight 
    • Absorbs instantly - Slip Resistant - Indoor and Outdoor use.

 
 
Acid Neutraliser - ACIDSORB 10kg Bag
 
ACIDSORB - for most Acid spills (except Hydrofluroric Acid & subject to any MSDS restrictions) Acid-Sorb is supplied in a 5 kg bag, 10kg bag or 5 litre jug and has been designed to contain, absorb and neutralize acid spills. Acid-Sorb is effective in absorbing the acid spill which then reduces the emission of toxic fumes. Acid-Sorb contains neutralizing agents that will partially, or in many cases, totally neutralize the acid, making it much safer to handle and dispose.
 
ACIDSORB 10kg Bag
 
ACIDSORB 10kg Bag
 
Battery Acid Spillpac Kit
 
The Battery Pac™ is designed specifically to be First Response and Control for common battery acid leaks and spills. Ideally suited to help prevent floor drain or ground contamination, this portable Pac offers ideal spill control for lead-acid batteries (up to 47 sulfuric acid) and helps you comply with EPA Title 40 CFR 144. Its compact design allows convenient use around industrial battery charging areas, such as fork truck charging stations and more.
 
Caustic Neutraliser - CAUSTICSORB
 
CAUSTICSORB - for most caustic spills (subject to MSDS requirements)
Caustic-Sorb is supplied in a 5 kg bag, 10kg bag or 5 litre jug and has been designed to contain, absorb and neutralize caustic(bases) spills.
It can be used on various types of low concentration caustic spills such as Sodium Hydroxide. (check first with Prenco as to any restrictions) Caustic-Sorb is effective in absorbing the caustic spill which then reduces the emission of toxic fumes. Caustic-Sorb contains neutralizing agents that will partially, or in many cases, totally neutralize thecaustic, making it much safer to handle and dispose.
 
 
UNI-SAFE pH PLUS Chemical Binder
 
UNI-SAFE ph PLUS is a HIGH PERFORMANCE ABSORBENT/BINDER UNIVERSALLY APPLICABLE TO ALL FLUIDS and to combat all hazardous fluid spill accidents. Its material composition will not cause any hazardous reaction (even with strongly reacting and oxidizing substances, such as nitric acid, hydrofluoric acid, and chlorsulfonic spills)
 
• Universality eliminates having to find spill-specific cleanup product.
• Absorbs all liquid spills, Oil & Chemical. Leaves surface smear free and reduces contamination.
• Acts as an emission blocker creating a 'fume barrier' protecting personnel and environment
• Gels the spill immediately for easy cleanup. Safe to use - non-flammable, non-toxic, no dangerous reactions.
 
 
Protecting Drains from entry of pollution is an important environmental objective
 
In this section you will find Solutions for preventing pollutants entering the stormwater system like Oils, fuels, grease, sand, slurries & sediment, leaves, cigarette butts, ear plugs, litter and storm debris.
 
Our products provide options for rapid deployment as well as permanent filtering of pollutants
 

• Drain Warden
Under grate filter unit is an excellent defence for reducing and controlling at the source, the entrance of contaminants such as oils, grease, coarse sediments, litter, butts, leaves, and debris into our water systems.

 
Drain Protection Mats
Provide a rapid and easy to deploy solution, for placing over a  surface drain to prevent entry of fluids in a chemical spill event, "An essential item for any loading area, chemical storage facility or refuelling bay".
 
Portable Spill Containment Barriers
Should be part of the standard equipment for activities where wastewater, slurry and spills have the potential to enter a stormwater drain or pollute the soil. Use in concrete cutting, street & paver cleaning operations, Construction & Building Industry & loading bays.
 
"It is worth the extra effort to look after the environment"
 
Plug n' Dike Emergency Leak Sealant
 
PLUG n DIKE EMERGENCY LEAK SEALANT PUTTY
 
Plug n Dike is a ready mixed bentonite putty that is ready to use straight from the tub/bucket. Plug n Dike seals off fuels, solvents and many other chemicals. Plug N Dike seals immediately and sticks to dirty, crumpled surfaces even with the fluid flowing out - No surface preparation is required. It is not a permanent seal as it will crack and dry out after a while. It will hold between 1-2 metres of head pressure.
USE for : Punctured drums / Leaking pipelines / Vehicle accidents / Damaged fuel tankers
 
SPILL KITS
 
There are a number of factors and issues to consider when designing, resourcing and locating spill kits and response equipment. Selecting the right equipment for the appropriate risk response, the amount required for containment/clean-up and how it is to be stored and accessed, are just a few considerations to be addressed.
There are also a range of products available to suit the type and risk, of fluid spilt and components can be altered to suit the particular situation. Determine which liquids may be spilt and then which type of absorbent you require.
Whilst we have a standard range of kits, we can manufacture custom made units to client's requirements.
 

The basic five types of spill kits in our range are:-

  • Hydrocarbon (Oil & Fuel) only Spill Kit - Hydrocarbon Kits are designed to recover oils & fuels in and around water and wet conditions without absorbing the water.\
  • General Purpose Spill Kit - These kits have absorbents that will deal with both water based non-hazardous liquids (coolants, water based paints etc) as well as hydrocarbons.
  • Acid/Alkali Neutralizer Spill Kit- containing specific purpose neutralizer absorbent powders.
    Special Fluid Spill Kit - recommended for specific risk liquids such as body fluids, mercury, formaldehyde etc and contain absorbents to best handle these fluids.
  • Chemical Spill Kit - is best for most chemical liquids such as acids, bases and general chemicals but can also still absorb hydrocarbons and general fluids.
 
SPILL KITS
 
 
We may not build the cheapest spill kits in the marketplace and they are not "just a wheelie bin with all the contents put in and a sticker put on the front!" but with fair comparisons, offering all the extras as listed and the quality of performance of the contents, the Prenco kits represent very good value.!
 
 
 
 

Smart Spill Pack / Shop Pads / WORKSHOP Spill Response Kit

Smart Packs of Super Absorbent Pads are great for preventing and cleaning up spills in the Workshop / Shopfloor . Perfect for soaking up leaks, drips and overspray.

Each Smart Pack retail package includes 25 Laminated, Super Absorbent Pads in a convenient plastic bag with zipper, carry handle Smart Packs are available in White - Oil-Only or Grey - Universal. Each package will absorb approximately 5 gallons.

CHEMICAL / OIL SPILL KITS
 
Smart Packs are Ideal for:
• Auto Repair 
• Boat Repair 
• Home Garage 
• Car Care 
• Industrial / Warehouse Facilities 
• Sales at Auto / Marine Stores
 

Emergency Spill Kit

The perfect economy spill kit for small spills. Easy to store behind the seat or in the trunk. Comes in a durable clear plastic bag with a zipper. Easily identified with “Emergency Spill Kit” Sorbent capacity of 4 gallons / 15 litres.

Standard Contents:
10 Absorbent Pads (Oil, Gas & Diesel)
2 3” x 4’ Absorbent Sock (Oil, Gas & Diesel)
2 Booms
1 HD Hazmat Disposal Bag
1 Pair of Nitrile Gloves

PRENCO AUSTRALIA Emergency Spill Kit
 

Clear Pack Spill Response Kit - (KI-ESK1)

A larger version of the entry level spill response kit for larger spills. Easy to store behind the seat or in the trunk. Comes in a durable clear plastic bag with a zipper. Easily identified with “Emergency Spill Kit” Sorbent capacity of 8 gallons / 30 litres.

Standard Contents:
20 Absorbent Pads (Oil, Gas & Diesel)
10 Universal Absorbent Pads (Antifreeze & Non Haz)
2 3” x 4’ Absorbent Socks (Oil, Gas & Diesel)
2 HD Hazmat Disposal Bags
1 Pair of Nitrile Gloves

PRENCO AUSTRALIA Clear Pack Spill Response Kit - (KI-ESK1)
 

Emergency Response Spill Kit

The perfect spil kit for trucks & heavy equipments. Designed for durability in a heavy duty plastic pail with a quick release, screw-on lid. Easily identified with “Emergency Spill Kit” decal. Sorbent capacity of 8 gallons / 30 litres. (Colour of drum will be subject to availability)

Standard Contents:
20 Absorbent Pads (Oil, Gas & Diesel)
2 3” x 4’ Absorbent Socks (Oil, Gas & Diesel)
2 HD Hazmat Disposal Bags
1 Pair of Nitrile Gloves

PRENCO AUSTRALIA Emergency Response Spill Kit
 

Spill Response Kit for Petroleum Tanker

This kit is designed to meet C.P.P.I minimum requirements for petroleum tanker trucks. The use of a steel container with a grounding strap meets the requirements to reduce the risk of ignition from static electricity. Easily identified with “Emergency Spill Kit” decal. Sorbent capacity of 20 litres.

Standard Contents:
10 Absorbent Pads (Oil, Gas, Diesel)
1 3” x 4’ Absorbent Sock (Oil, Gas, Diesel)
1 2 lb. Bag of Granular Absorbent
1 36” x 36” x 1/16” Neoprene Storm Drain Cover
4 HD Hazmat Disposal Bags
1 Laminated List of Contents

PRENCO AUSTRALIA Spill Response Kit for Petroleum Tanker
 

Mobile Marine / Dock Spill Response Kit

The perfect spill kit for indoor or outdoor locations such as marine repair facilities and marinas. UV stabilized polyethylene container is weatherproof and yellow in colour. Large wheels allow this kit to be moved quickly to the site of a spill. Easily identified with large red “Spill Kit” decal. Sorbent capacity of 94 gallons / 355 litres.

Standard Contents:
100 Absorbent Pads (Oil, Gas & Diesel)
8 Sections of 5” x 10’ Linkable Absorbent Boom
8 HD Hazmat Disposal Bags
2 Pairs of Nitrile Gloves 
1 Spill Instruction Sheet 
1 Laminated List of Contents

PRENCO AUSTRALIA Mobile Marine / Dock Spill Response Kit
 

Major Incident Overpack Spill Response Kit

The perfect spill kit for First Responders and Drum handling Facilities. Ideal for dealing with any major incident involving hazerdous materials. The 95 gallon overpack is designed to transport a damaged or a leaking 55 gallon / 205 litre drum. The rugged, UV-protected polyethylene overpack container meets the highest UN and DOT certification available. The screw on lid seals on to the overpack with an O-ring seal. Easily identified with red “Spill Kit” decal. This kit has a sorbent capacity of 92 gallons / 350 litres..

Standard Contents:
100 Absorbent Pads (Oil, Gas & Diesel)
100 Universal Absorbent Pads (Antifreeze & Non-Haz)
4 3” x 4’ Absorbent Socks (Oil, Gas & Diesel)
4 3” x 4'  Absorbent Socks (Antifreeze & Non-Haz)
4 Sections of 5" x 10' Linkable
Absorbent Boom
1 36” x 36” Neoprene Drain Cover
2 1 Lb. Jar of Plug n Dike (Leak Stop)
12  HD Hazmat Disposal Bags
2 Pairs of Nitrile Gloves
2 Pairs of Plastic Splash Goggles
2 Disposable Respirators  
2 Pairs Tyvek Coveralls
1 Spill Instruction Sheet
1 Laminated List of Contents

PRENCO AUSTRALIA Major Incident Overpack Spill Response Kit
 

TOBIT Hazmat Acid Spill Response Kit

The perfect spill kit for the clean up of acid and hazardous liquid spills. Designed for durability in a heavy duty oil and water resistant bag, with zipper and carry handles. Easily identified with “Spill Response Kit” screenprint.

Standard Contents:
25 Yellow/ White Hazmat Absorbent Pads 
2 3” x 4’ Yellow / white Hazmat Absorbent Socks
3  HD Hazmat Disposal Bags
1  Pair of PVC Rubber Gloves 
1 Pair of Safety Goggles

Acid and alkali neutralizers can be added to this spill kit.

PRENCO AUSTRALIA -TOBIT Hazmat Acid Spill Response Kit
 

TOBIT First Response Spill Kit

The perfect spill kit for logging, trucking and equipment operators requiring substantial first response spill material. Also an ideal spill kit for small sites. Designed for durability and easy access in a yellow DOT/UN approved poly lab pack with easy spin-off lid. Easily identified with “Emergency Spill Kit” capacity of 21 gallons / 80 litres.

Standard Contents:
30 Absorbent Pads (Oil, Gas & Diesel)
15 Universal Absorbent Pads ( Non-Haz)
2 (9” x 15”) Oil Absorbent Pillows
3 3” x 4’ Absorbent Socks (Oil, Gas & Diesel)
6 HD Hazmat Disposal Bags
2 Pairs of Nitrile Gloves 
1 Laminated List of Contents

TOBIT First Response Spill Kit
Home - Profile - Contact Us - Feedback Designed & Hosted by : MID   Promoted by : GID
 
| HEAD PROTECTION | EAR PROTECTION | FACE PROTECTION | HAND PROTECTION | EYE PROTECTION | SAFETY SHOWER | INDUSTRIAL HAZARD | FEET PROTECTION | FALL PROTECTION | BODY PROTECTION | CHEMICAL / OIL SPILL KITS | RESPIRATORYPROTECTION | KIMBERLY - CLARK HYGIENE / WORK PLACE WASH ROOM PRODUCTS | LOCK OUT / TAG OUT | WORK WEAR | SUPPLIED AIR RESPIRATORS / SCBA | GAS DETECTION | GAS TIGHT SUITS | MOTION SCOUT | THERMAL IMAGING CAMERA | PORTABLE COMPRESSORS | STATIONARY COMPRESSORS | NITROX SYSTEMS | AIR TREATMENT AND TESTING | STORAGE | DISTRIBUTION | ACCESSORIES| LIFTING EQUIPMENTS